ECOSTRIP SODA (SOLUBLE) – Hardness approx 2.5 mohs.ECO BAG
Sodium Bicarbonate – (Food grade product)

Ecostrip SODA is used for cleaning and coating removal where little or no surface profile or damage to delicate substrates is to be avoided.

It can be used for cleaning timber,wood, oak beams, oak floors, doors,cars body panels, fibre-glass, engine, boat hulls, masonry, fibre-glass and food processing equipment.

Soda blasting can also be used to remove graffiti (be careful on some brick work as can bring out the salt of the brick) and to clean structural steel.

Its also effective for mold and fire/smoke damage cleanup as it cleans and deodorizes

All soluble materials produce no profile on steel and shine stainless steel (when used in the wet blasting process). Usually used in wet blast applications. Will not damage rotating equipment or bearings and is non-sparking if used wet as directed.

The advantage of using Ecostrip soda, as opposed to sand, crushed walnut shells, coal slag, or any other abrasive, is that it’s environmentally safe, less aggressive, relatively affordable, and easily rinsed away with water as it is a soluble product.

In fact, the first large-scale industrial use of soda blasting occurred during the 1986 centennial restoration of the Statue of Liberty. It was the only safe and effective way to remove coal tar, paint, and corrosion from the statue’s soft copper skin.

Our Ecotrip soda can also be used  in swimming pools. By adding a small amount to your pool can keep your pH and Total Alkalinity balanced with ease.

Other used for ECOTSRIP SODA In and around the house Include

  1. Drains
  2. Washing machine
  3. Refrigerator
  4. Pots and pans
  5. Microwave
  6. Ovens
  7. Dishwasher
  8. Rubbish Bins

Ultra Coarse – Average 285 microns. General purpose use, where de-painting and de-greasing and solubility required.

PLEASE NOTE – The use of SOLUBLE abrasives is not recommended on certain types of stonework or brickwork

DATA SHEET AVAILABLE IF REQUIRED